Kenmore Pro 56043 Owner's Manual download pdf (Page 11)

Warranty Safety CleaningOperation Installation Service Parts

INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)

INSTALL WOOD MOUNTING STRIP

Using standard 3/8" screws

provided, secure the adapter

to the top (or back) of the

hood. Seal the adapter to the

hood using metal foil duct tape.

For round ducting, install an

appropriate sized transition and

seal the joints with metal foil

duct tape.

HJ0013

Measure and mark a level line on wall above cooktop

location for the wood mounting strip (see illustration

at right). Remove wood mounting strip from back of

hood. Use no. 10 - 2" ﬂ at head screws to secure the

mounting strip to the drywall. Make sure to hit the wall studs.

HD0589A

CAUTION: Due to the weight of this hood, ensure

that the wood strip is attached to all of the available

studs (2 studs minimum for a 30" width hood, more

as hood width increases); not into the drywall alone.

INSTALL RECIRCULATION KIT 55673 OR 55683 (NON-DUCTED INST. ONLY)

INSTALL 55633 OR 55643 OPTIONAL DECORATIVE FLUE (DUCTED INST. ONLY)

Refer to the instructions sheet included with the recirculation kit for details.

B Assemble both sides to the front using 4 no. 8 x 0.375" included screws.

C Place the decorative flue cover on top on the range hood.

D Secure the decorative flue cover to the top of the range hood using 6 no. 8 x 0.375" included screws.

x 4

x 6

HR0069A

1. Drywall 4. Wall anchor location

2. Wood mounting strip 3. Flat head screw

5. Back of hood outline 6. Wall studs

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Kenmore Pro 56043 Owner's Manual Page 11